Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® Clear G850 Rnew® MED - PA* - ARKEMA

Check here, which other Rilsan Clear datasheets, application examples or technical articles are available in Material Data Center

Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Funzioni

Any use of this information falls under the rules of our disclaimer.

Testo del prodotto

PA,,GHT,C14-020

Rilsan® Clear G 850 Rnew® MED is a high performance transparent copolyamide having outstanding purity level, partially based on renewable resources. This grade offers highest quality  and is specifically designed to meet the stringent requirements of the medical applications.

According to ASTM D6866, the biobased carbon content is measured at 45%.

Main applications:

• Dental accessories
• Breathing mask
• Medical perfusion tube accessories

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit,  please refer to our technical services.

Caratteristiche Fisiche	secco/cond	Unitá	Norma del test
ISO Data
Indice di fusione di volume, MVR	4.4 / *	cm³/10min	ISO 1133
Temperatura	275 / *	°C	-
Carico	2.16 / *	kg	-
Ritiro di stampaggio, parallelo	0.9 / *	%	ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare	0.9 / *	%	ISO 294-4, 2577

Proprietà Meccaniche	secco/cond	Unitá	Norma del test
ISO Data
Modulo a trazione	1680 / 1640	MPa	ISO 527
Carico unitario a trazione	64 / 58	MPa	ISO 527
Deformazione a snervamento	8.2 / 8.6	%	ISO 527
Deformazione nominale a rottura	>50 / >50	%	ISO 527
Resistenzia all'urto Charpy con intaglio, +23°C	8.5 / 15	kJ/m²	ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C	8.6 / 11.4	kJ/m²	ISO 179/1eA
Durezza Shore D	80 / *	-	ISO 7619-1

Proprietà Termiche	secco/cond	Unitá	Norma del test
ISO Data
Temperatura di transizione vetrosa, 10°C/min	145 / *	°C	ISO 11357-1/-2
Temp.di inflessione sotto carico, 1.80 MPa	120 / *	°C	ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa	135 / *	°C	ISO 75-1/-2

Altre Proprietà	secco/cond	Unitá	Norma del test
Assorbimento d'acqua	4 / *	%	Sim. alla ISO 62
Assorbimento d'umidità	1.7 / *	%	Sim. alla ISO 62
Massa volumica	1010 / 1010	kg/m³	ISO 1183
Biobased content	45	%	-

Funzioni

Caratteristiche

Processabilità e Forma di Forni

Stampaggio ad Iniezione, Estrusione Film

Forma fisica disponibile

Pellet

Caratteristiche speciali

Stabilizzato o stabile al calore, Trasparente

Certifications

Contiene risorse rinnovabili

Applicazioni

Medicale

Disponibilità geografica

Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa

Altre informazioni

Stampaggio ad Iniezione

Processing conditions:
- Typical melt temperature  (Min / Recommended / Max)  : 250°C / 280°C / 300°C
- Typical mold temperature  : 20 - 80 °C
- Dyring time and temperature (only for bags opened for more than two hours): 4 - 6 hours at 90°C

Estrusione Film

Extrusion Process conditions:

- Typical melt temperature  (Min / Recommended / Max)  : 250°C / 270°C / 290°C

- Dyring time and temperature (only for bags opened for more than two hours): 4 - 6 hours at 90°C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.